Hydex 105-16 Thermoplastic Datasheet
DESCRIPTION
Hydex ® 105-61 is a proprietary high
temperature thermoplastic product designed for superior dimensional
stability over a wide temperature range. It can be used as an alternative to
Torlon ®
5530 (30% glass filled Torlon).
No further information on this material is available at this time.
| PRELIMINARY PROPERTIES of HYDEX
® 105-61 |
| ASTM or UL test |
Property |
Hydex ® 105-61 |
| PHYSICAL |
| D792 |
Density (lb/in³)
(g/cm³) |
0.051
1.42 |
| D570 |
Water Absorption, 24 hrs (%) |
< 0.3 |
| MECHANICAL |
| D638 |
Tensile Strength @ Break (psi) |
10,000 |
| D638 |
Tensile Elongation @ Break (%) |
4 |
| D638 |
Tensile Modulus (psi) |
480,000 |
| D790 |
Flexural Strength (psi) |
15,000 |
| D790 |
Flexural Modulus (psi) |
490,000 |
| D256 |
IZOD Impact Notched (ft-lb/in) |
0.4 |
| D785 |
Hardness, Rockwell |
- |
| THERMAL |
| D696 |
Coefficient of Linear Thermal Expansion
(x 10 -6 in./in./°F) |
0.17 |
| - |
Max Operating Temp (°F / °C) |
350 / 175 |
| UL94 |
Flammability Rating |
- |
| ELECTRICAL |
| D149 |
Dielectric Strength (V/mil) short time, 1/8" thick |
- |
| D150 |
Dielectric Constant at 1 KHz |
- |
| D257 |
Volume Resistivity (ohm-cm)at 50% RH |
- |
NOTE: The information contained herein are typical values intended
for reference and comparison purposes only. They should NOT be used as a
basis for design specifications or quality control. Contact us for
manufacturers' complete material property datasheets.
All values at 73°F (23°C) unless otherwise noted.
HYDEX is a registered trademark of A.L. Hyde Company.
TORLON is a registered trademark of Solvay Advanced Polymers.
