HTP 800 Clear PVC Specifications
GENERAL PROPERTIES
HTP 800 is a clear PVC based material for use as windows and doors in
cleanrooms and related equipment. Notable properties include excellent light
transmission, chemical resistance, and flame resistance. HTP 800 is UL94 V-0
rated and meets the Factory Mutual Standard (FM4910) for flame spread, smoke
development, and corrosion resistance (FM4910 listing JI#3006348).HTP 800 is available in sheets from 3 to 10mm (.118 to .394") thick ONLY.
Standard sheet size is 1 x 2 meters (39.4 x 78.7") ONLY.
APPLICATIONS
• Fluid handling • Semiconductor equipment • Fire safety components
• Clear windows & doors
KEY PROPERTIES
• Excellent clarity and 69% light transmittance - no haze •
Chemical resistance • Stiffness • Contains no lead (Pb), heavy metals or
other EPA SARA 313 reportable ingredients • Most cost-effective FM4910 clear
plastic available
(see also
other Fire Safe Plastics and
Standard PVC datasheets)
| TYPICAL PROPERTIES of HTP 800 CLEAR PVC |
| ASTM or UL test |
Property |
HTP 800 Clear PVC |
| PHYSICAL |
| D792 |
Density (lb/in³)
(g/cm³) |
0.051
1.41 |
| D570 |
Water Absorption, 24 hrs (%) |
0.016 |
| MECHANICAL |
| D638 |
Tensile Strength (psi) |
8,700 |
| D638 |
Tensile Modulus (psi) |
- |
| D638 |
Tensile Elongation at Break (%) |
45 |
| D790 |
Flexural Strength (psi) |
14,000 |
| D790 |
Flexural Modulus (psi) |
435,500 |
| D695 |
Compressive Strength (psi) |
- |
| D695 |
Compressive Modulus (psi) |
- |
| D785 |
Hardness, Rockwell |
M95 / R124 |
| D256 |
IZOD Notched Impact (ft-lb/in) |
1.4 |
| THERMAL |
| D696 |
Coefficient of Linear Thermal Expansion
(x 10 -5 in./in./°F) |
- |
| D648 |
Heat Deflection Temp (°F / °C)
at 264 psi |
170 / 76 |
| D3418 |
Melting Temp (°F / °C) |
- |
| - |
Max Operating Temp (°F / °C) |
200 / 93 |
| C177 |
Thermal Conductivity
(BTU-in/ft²-hr-°F)
(x 10 -4 cal/cm-sec-°C) |
-
- |
| UL94 |
Flammability Rating |
V-0 |
| ELECTRICAL |
| D149 |
Dielectric Strength (V/mil) short time, .001" thick |
279 |
| D150 |
Dielectric Constant at 1 MHz |
- |
| D150 |
Dissipation Factor at 1 MHz |
- |
| D257 |
Volume Resistivity (ohm-cm)at 50% RH |
- |
NOTE: The information contained herein are typical values intended
for reference and comparison purposes only. They should NOT be used as a
basis for design specifications or quality control. Contact us for
manufacturers' complete material property datasheets.
All values at 73°F (23°C) unless otherwise noted.
