Corzan 4910 ® CPVC Specifications
GENERAL PROPERTIES
Corzan ® 4910 CPVC is a new material developed for
use in the construction of wet benches and other cleanroom equipment for the
semiconductor industry. It is UL94 V-0 rated and meets the FM Global
(formerly Factory Mutual) Standard (FM4910) for flame spread, smoke
development, and corrosion resistance.
The advantages of Corzan ® 4910 CPVC are its
excellent balance of properties related to strength, weldability and
chemical resistance, as well as outstanding performance in flame and smoke.
Corzan is easy to fabricate and use. It has excellent mechanical strength
and provides resistance to most semiconductor processing chemistries,
including both strong and weak acids and bases, salts, and aliphatic
hydrocarbons.
Corzan ® 4910 is available in sheet form only from
.250" to .750" thicknesses in 48" x 96" sheet sizes, and thicknesses of 1"
and above in 48" square sheet sizes. It is
NATURAL
(ivory-white) in color.
APPLICATIONS
• Wet benches • Cleaning tools • Point source scrubbers • Ducting
systems • Fluid handling • Other semiconductor equipment • Fire safety
components
KEY PROPERTIES
• High purity • Flame resistance • Impact resistance • Excellent
weldability • Low permeability • UL94 V-0 and FM 4910 listed
(see also
other Fire Safe Plastics and
Standard CPVC datasheets)
| TYPICAL PROPERTIES of CORZAN ®
4910 CPVC |
| ASTM or UL test |
Property |
Corzan 4910 CPVC |
| PHYSICAL |
| D792 |
Density (lb/in³)
(g/cm³) |
0.056
1.56 |
| D570 |
Water Absorption, 24 hrs (%) |
- |
| MECHANICAL |
| D638 |
Tensile Strength (psi) |
7,900 |
| D638 |
Tensile Modulus (psi) |
410,000 |
| D638 |
Tensile Elongation at Break (%) |
- |
| D790 |
Flexural Strength (psi) |
14,500 |
| D790 |
Flexural Modulus (psi) |
457,000 |
| D695 |
Compressive Strength (psi) |
- |
| D695 |
Compressive Modulus (psi) |
- |
| D785 |
Hardness, Rockwell |
- |
| D256 |
IZOD Notched Impact (ft-lb/in) |
1.5 |
| THERMAL |
| D696 |
Coefficient of Linear Thermal Expansion
(x 10 -5 in./in./°F) |
- |
| D648 |
Heat Deflection Temp (°F / °C)
at 264 psi |
212 / 100 |
| D3418 |
Melting Temp (°F / °C) |
- |
| - |
Max Operating Temp (°F / °C) |
200 / 93 |
| C177 |
Thermal Conductivity
(BTU-in/ft²-hr-°F)
(x 10 -4 cal/cm-sec-°C) |
-
- |
| UL94 |
Flammability Rating |
V-0 |
| ELECTRICAL |
| D149 |
Dielectric Strength (V/mil) short time, .001" thick |
- |
| D150 |
Dielectric Constant at 1 MHz |
- |
| D150 |
Dissipation Factor at 1 MHz |
- |
| D257 |
Volume Resistivity (ohm-cm)at 50% RH |
- |
NOTE: The information contained herein are typical values intended
for reference and comparison purposes only. They should NOT be used as a
basis for design specifications or quality control. Contact us for
manufacturers' complete material property datasheets.
All values at 73°F (23°C) unless otherwise noted.
CORZAN is a registered trademark of Noveon, Inc.
